The analyzer uses the thermal conductivity properties of the selected gas to measure its concentration in air.
There are three independent channels in the analyzer that monitor simultaneously three sample points. Sampling is through three 50′ [15.25m] lengths of tubing with a motor-driven pump drawing a gas/air sample into the unit for analysis. The concentration for each channel is displayed real-time on a liquid crystal display. The data is also stored in the unit’s memory. It can then be downloaded to a computer and printed out. The unit includes the power cord, (3) 50′ [15.25m] sample lines and Trilogger software, used to extract the test data from the unit.
The analyzer is capable of being setup for 2 gases. Virtually any fire protection gas can be measured. They are, but not limited to, Carbon Dioxide, HFC-227ea (FM-200 & FE-227ea), Inergen, Argon, Halon 1301, Halon 1211, FE-13, SF6 Argonite and HFC-125.
Yes